Yesterday I shimmed the front of Red Dog's saddle up ¼” using spacers under the mounting bracket. The difference in riding position was noticable so today I added another ¼” of spacers bringing the total change to ½”. It was a simple enough operation; I used 3 thick steel washers under each of the 4 mounting bolts and that did the trick.
The saddle shims went under this bracket
I also moved the backrest towards the rear about 3/16th of an inch which doesn’t sound like much but I think it’s enough. Back rests are funny critters, they can take the load off your back while riding but if they’re positioned too far forward they work against you and can cause fatigue or worse.
A friend of mine recently experienced some very painful back problems that were traced to the position of the back rest on his Goldwing. It was too far forward and whenever he hit a hard bump it telegraphed to his kidneys. After five days on the road it was so bad he had to stop riding for several days to recuperate. Until then I'd no idea such a thing could happen.
Once the adjustments were made I was ready for a test run. I rode south on 101 around 20 miles to Port Orford, then on the way back I rode out to the Cape Blanco Lighthouse. Once I left highway 101 and headed west I could see solid fog banks moving in along the cape. By the time I reached the park area it was totally socked in and the temperature dropped dramatically. It was so cold I had to turn the heated grips on.
Freezing cold in August no less! What's that all about?
Choppy cross winds made riding very rough, one moment they hit you hard enough to drive you off the road and the next moment they stopped. By the time I arrived home I’d only logged around 60 miles but felt as if I’d ridden 100. That’s how it is on the coast sometimes, you never really know what to expect.
Time for a repaint Coos County!
At least the saddle issues seem to be improving to the point I probably won’t take it back to Rich’s. The shims raised it enough that I'm not sliding nearly as much and that’s what I was after.
Some time in the next few days I’ll do some riding with the Unigo trailer hooked up and see how that affects things. The last time I pulled it I had it loaded to the point it was overloaded and the handling was affected.
I may get in touch with the manufacturer for some additional advice on loading techniques. Once it’s all sorted out I should be ready for my first outing with it, something I’m very much looking forward to.
Stay tuned...
LL



